Toshiba e-STUDIO556 - Page 668

e-STUDIO556/656/756/856(Ver03) © 2012 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 160
[2E11] Insufficient memory capacity for USB storage
[2E12] Message reception error in USB storage
[2E13] Message transmission error in USB storage
[2E14] Invalid parameter for USB storage
[2E15] Exceeding the maximum size for file sharing
Replace parts Remarks
Classification Error item
File sharing related error
Memory in the USB folder is not sufficient.
Check item Measures
Setting
If there is a job in progress, perform the job in error again after the job in
progress is finished. If the error still occurs, turn the power OFF and then
back ON, and then perform the job in error again.
Replace parts Remarks
Classification Error item
File sharing related error
Job status is invalid.
Check item Measures
Setting
Turn the power OFF and then back ON. Perform the job in error again.
Replace parts Remarks
Classification Error item
File sharing related error
The specified parameter is invalid.
Check item Measures
Setting
If a template is being used, recreate the template. If the error still occurs,
turn the power OFF and then back ON. Perform the job in error again.
Replace parts Remarks
Classification Error item
File sharing related error
There are too many files in the folder.