e-STUDIO556/656/756/856
15
05/08 Mode Element
Item Subitem Code
Details
RAM Contents
Mode
notification function
information
transmission setting
of real time log
notification function
Sets whether the department information (number,
name, code) is transmitted or not in the real time log
notification function.
0: Department number, department name, department
code
1: Department number, department name
Mode
setting of standard
data overwrite
function
1: Enabled
* This code is valid for the following model or
destination:
- e-STUDIO556SE/656SE/756SE/856SE
Mode
setting of standard
EWB function
1: Enabled
* This code is valid for the following model or
destination:
- e-STUDIO556SE/656SE/756SE/856SE
- e-STUDIO556/656/756/856 for MJD
Mode
(SNMP)
1: Enabled
Mode
System General 3635 Proof print function 1 0~1 SYS 0: Invalid 1: Valid 1
mode
System Network InternetFax 3637
transmission header
0 0-1 SYS 0: Disabled 1: Enabled 1
mode
System Network InternetFax 3638
record
0 0-1 SYS 0: Disabled 1: Enabled 1
mode
System Network InternetFax 3639
transmission header
1: Overwriting inside the image (5 mm from the top)
2: Adding outside the image (5 mm from the top)
mode
reissued card
0 0-1 SYS 0: Disabled 1: Enabled 1
Mode
device authentication
serial
number
"MFP's serial number" is set as default. Perform 08-
9083 to set the default value.
Mode
authentication
- UTY Maximum 128 letters 12