8
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856/557/657/757/857
ERROR CODE AND TROUBLESHOOTING
8 - 45
[E220] 2nd drawer transport jam (paper not reaching 1st drawer transport sensor)
[E310] 3rd drawer transport jam (paper not reaching 1st drawer transport sensor)
[E340] 4th drawer transport jam (paper not reaching 1st transport sensor)
[E3D0] Tandem LCF transport jam (paper not reaching 1st drawer transport sensor)
Transport motor
• Motor check (Perform the output check:03-133/183)
• Harness check.
LGC board • Connector check (CN341)
• Board check.
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
Registration sensor
Intermediate transport sensor
Transport motor
LGC board
Rollers
Classification Error item
Paper transport jam Paper not reaching 1st drawer transport sensor
Check item Measures
1st drawer transport sensor (S33) • Sensor check (Perform the input check: 03-[FAX]OFF/[1]/[C])
• Connector check
• Harness check.
Each transport clutch
(CLT5, 7, 9, 11)
• Clutch check (Perform the output check: 03-229/230/231/225)
• Connector check
• Harness check.
LGC board • Connector check (CN341)
• Board check.
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
1st drawer transport sensor
Each transport clutch
LGC board
Rollers
Check item Measures
To Next Page
Loading...
