e-STUDIO520/600/720/850 ERROR CODE AND SELF-DIAGNOSTIC MODE March 2005 © TOSHIBA TEC
2 - 20
6) E-mail reception related error (when GM-1050/4010 or 2040 is installed)
Error code
Message displayed in the
TopAccess screen
Contents Troubleshooting
3A10 MIME Error has been detected in
the received mail.
E-mail MIME error Ch.5.1.14 [ 6 ]
3A11 MIME Error has been detected in
the received mail. This mail has
been transferred to the adminis-
trator.
Ch.5.1.14 [ 6 ]
3A12 MIME Error has been detected in
the received mail. This mail could
not be transferred to the adminis-
trator.
Ch.5.1.14 [ 6 ]
3A20 Analyze Error has been detected
in the received mail.
E-mail analysis error Ch.5.1.14 [ 6 ]
3A21 Analyze Error has been detected
in the received mail. This mail
has been transferred to the
administrator.
Ch.5.1.14 [ 6 ]
3A22 Analyze Error has been detected
in the received mail. This mail
could not be transferred to the
administrator.
Ch.5.1.14 [ 6 ]
3A30 Whole partial mails were not
reached by timeout.
Partial mail time-out error Ch.5.1.14 [ 6 ]
3A40 Partial Mail Error has been
detected in the received mail.
Partial mail related error Ch.5.1.14 [ 6 ]
3A50 HDD Full Error has been
occurred in this mail.
Insufficient HDD capacity error Ch.5.1.14 [ 6 ]
3A51 HDD Full Error has been
occurred in this mail. This mail
has been transferred to the
administrator.
Ch.5.1.14 [ 6 ]
3A52 HDD Full Error has been
occurred in this mail. This mail
could not be transferred to the
administrator.
Ch.5.1.14 [ 6 ]
3A60 HDD Full Warning has been
occurred in this mail.
Warning of insufficient HDD capacity Ch.5.1.14 [ 6 ]
3A61 HDD Full Warning has been
occurred in this mail. This mail
could not be transferred to the
administrator.
Ch.5.1.14 [ 6 ]
3A62 HDD Full Warning has been
occurred in this mail. This mail
could not be transferred to the
administrator.
Ch.5.1.14 [ 6 ]
3A70 Receiving partial mail was
aborted since the partial mail set-
ting has been changed to Dis-
able.
Warning of partial mail interruption Ch.5.1.14 [ 6 ]
To Next Page
Loading...
