March 2005 © TOSHIBA TEC e-STUDIO520/600/720/850 FIRMWARE UPDATING
6 - 43
6
[C] Display during the update
Update is performed in parallel as shown in the transition diagram below.
Fig.6-40
Below is an example of the changes of the LCD screen during update. Note that the screen order may
be different from the actual one, because a parallel update is performed in the process.
When the device is recognized properly, the
screen for selecting update items is displayed.
Item Selection Screen for Update
Update Completed
7. Scanner Firmware
Update
［Scanner ROM］
4. LSR Firmware
Update
［Laser ROM］
5. PFC Firmware
Update
［PFC ROM］
6. Engine Firmware
Update
［Engine ROM］
1. HDD Update
［Master data］
0. OS Update
［System ROM］
2. UI Data Update
3. System Firmware
Update
05/05
To Next Page
Loading...
