March 2005 © TOSHIBA TEC e-STUDIO520/600/720/850 DATA CLONING with USB STORAGE DEVICE
9 - 15
9
<Setting Restore>
(11) Connect the USB storage device to the USB connector (host) on the SYS board.
(12) Turn the power ON while pressing the [5] and [9] button simultaneously.
The screen to select the backup/restore items is displayed.
Fig.9-21
Note: Note:
After the item is selected with the digital keys, displaying the next menu may take a long time.
(13) Press the [4] button.
The screen to select the setting restore item is displayed. In this screen, the items to be restored
are shown after the mark "*". (No items are selected in the screen by default.)
Fig.9-22
05/11
To Next Page
Loading...
