Toshiba E-STUDIO6506AC - Page 186

e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-50
3. Printer-specific Adjustments
* This adjustment will have an effect only on full-color printing.
(2) Select [05 ADJUSTMENT MODE]. Set 0 for the setting values for codes [8109] to [8113] to adjust the filter.
Color
mode
Image
quality
type
[05] code
Subcode
Recommended
value
Acceptable
value
range
Default
Auto/Color
General
05-8110
0/1/2
Change the value
to 0.
0 to 255 128
Photo
05-8111
0/1/2
Presentation
05-8112
0/1/2
Line art
05-8113
0/1/2
Red seal
color
05-8109 0/1/2
Subcode
Original
0
Text
1
Graphics
2
Image
<Note> •When the setting value of this code is larger than “128” (default), the level of the sharpness
intensity is equivalent to the one when the value is set within a range of “0” to “+4” on the
printer driver menu. When the setting value of this code is smaller than “128”, the level of the
sharpness intensity is equivalent to the one when the value is set within a range of “-4” to “-1”
on the printer driver menu. Note that when the setting value of this code is “0”, the image
quality will not be changed even if the value is changed on the printer driver menu.
PCL6
PS3
XPS
Mac