Toshiba E-STUDIO6506AC - Page 67

e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
2-21
2. Copier-specific Adjustments
Subcode
Target area of hue
adjustment
Recommended value
0
For adjusting the tint of
Red
Setting a larger value: The saturation level increases.
Setting a smaller value: The saturation level decreases.
1
For adjusting the tint of
Yellow
2
For adjusting the tint of
Green
3
For adjusting the tint of
Cyan
4
For adjusting the tint of
Blue
5
For adjusting the tint of
Magenta
(5) Select [05 ADJUSTMENT MODE]. Change the values for codes [7960 to 7987] to adjust the color density.
Color to
adjust
Original mode
[05] code
Subcode
Recommended value
Acceptable
value range
Default
Y
(Yellow)
Text/Photo
05-7960
0/1/2
Set a value larger than 128
to increase the density.
Set a value smaller than 128
to decrease the density.
0 to 255 128
Text
05-7961
0/1/2
Printed image
05-7962
0/1/2
Photo
05-7963
0/1/2
Map
05-7964
0/1/2
User custom
05-7980
0/1/2
Red seal color
05-7984
0/1/2
M
(Magenta)
Text/Photo
05-7965
0/1/2
Text
05-7966
0/1/2
Printed image
05-7967
0/1/2
Photo
05-7968
0/1/2
Map
05-7969
0/1/2
User custom
05-7981
0/1/2
Red seal color
05-7985
0/1/2
C
(Cyan)
Text/Photo
05-7970
0/1/2
Text
05-7971
0/1/2
Printed image
05-7972
0/1/2
Photo
05-7973
0/1/2
Map
05-7974
0/1/2
User custom
05-7982
0/1/2
Red seal color
05-7986
0/1/2
K
(Black)
Text/Photo
05-7975
0/1/2
Text
05-7976
0/1/2
Printed image
05-7977
0/1/2
Photo
05-7978
0/1/2
Map
05-7979
0/1/2
User custom
05-7983
0/1/2
Red seal color
05-7987
0/1/2
* Set the value in increments of approximately 10, while checking the copy image until the optimum value is
obtained.
* The value for the code corresponding to the original mode (Text/Photo, Text, or Printed image) will affect
the copy image quality in the Full color mode and the Auto color mode.