2 SETTING ITEMS (ADMIN)
144 Setting Network Functions
6
Confirm the settings and press [OK].
You will be returned to the NETWORK menu.
IPv6 address obtained from the DHCPv6 server is displayed.
7
Continue to another network setting if required, then press [APPLY NOW].
“NETWORK INITIALIZING” is displayed at the lower left of the screen and this equipment starts initializing the
network interface card to apply the changes. This message disappears after it is finished.
If Duplicate Address Detection (DAD) detects duplicate addresses, the message “IPv6 ADDRESS CONFLICT”
is displayed on the touch panel.
To Next Page
Loading...
Need help?
General
