Toshiba e-STUDIO656 - Page 278

e-STUDIO556/656/756/856(Ver03) © 2012 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 132
(4) Remove 1 E-ring and 1 bushing.
Fig. 4-374
(5) Remove 4 screws and take off the platen
guide.
Fig. 4-375
(6) Take off the reading start roller.
Note:
When installing the reading start roller, refix
the loosened screw and tighten the belt
tension.
Fig. 4-376
E-ring
Bushing