4
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
4 - 163
(5) Remove 1 screw and take off the connector
cover.
Fig. 4-464
(6) Disconnect the interface cable of the Large
Capacity Feeder (LCF).
Fig. 4-465
(7) Remove 2 fixing screws on the rear side.
Fig. 4-466
(8) Remove 2 fixing screws on the front side.
Fig. 4-467
Screw
Connector cover
Interface cable
To Next Page
Loading...
