Toshiba e-STUDIO656 - Page 556

e-STUDIO556/656/756/856(Ver03) © 2012 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 48
[E510] Transport jam during duplex printing (paper not reaching reverse sensor-2)
[E511] Transport jam during duplex printing (paper not reaching horizontal transport sensor-1
Classification Error item
Paper transport jam Paper not reaching reverse sensor-2
Check item Measures
Horizontal transport sensor-1(S19) • Sensor check (Perform the input check: 03-[FAX]OFF/[9]/[F])
• Connector check
• Harness check.
Horizontal transport clutch
(CLT2, 3)
• Clutch check (Perform the output check: 03-220 / 221)
• Connector check
• Harness check.
LGC board • Connector check (CN334, 335)
• Board check.
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
Horizontal transport sensor-1
Horizontal transport clutch
LGC board
Rollers
Classification Error item
Paper transport jam Paper not reaching horizontal transport sensor-1
Check item Measures
Horizontal transport sensor-1(S19) • Sensor check (Perform the input check: 03-[FAX]OFF/[9]/[F])
• Connector check
• Harness check.
Horizontal transport clutch
(CLT1, 2)
• Clutch check (Perform the output check: 03-110 / 220)
• Connector check
• Harness check.
LGC board • Connector check (CN344)
• Board check.
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
Horizontal transport sensor-1
Horizontal transport clutch
LGC board
Rollers