Toshiba e-STUDIO656 - Page 561

8
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
ERROR CODE AND TROUBLESHOOTING
8 - 53
[E580] Paper stopping at reverse section
[E590] Paper stopping at exit section
Classification Error item
Paper transport jam The trailing edge of paper does not pass the reverse sensor-1 or reverse
sensor-2 after its leading edge has reached the reverse sensor-1 or
reverse sensor-2.
Check item Measures
Reverse sensor-1, 2
(S23, S24)
• Sensor check (Perform the input check: 03-[FAX]OFF/[7]/[E], /[7]/[D])
• Connector check
• Harness check.
Reverse motor
(M19)
• Motor check (Perform the output check: 03-126)
• Speed check (05-4538, 05-4539, 05-4540
• Connector check
• Harness check.
LGC board • Connector check (CN335)
• Board check.
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
Reverse sensor-1, 2
Reverse motor
LGC board
Rollers
Classification Error item
Paper transport jam The trailing edge of paper does not pass the exit sensor after its leading
edge has reached the exit sensor.
Check item Measures
Exit motor
(M18)
• Motor check (Perform the output check: 03-120)
• Connector check
• Harness check.
LGC board • Connector check (CN336)
• Board check.
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
Exit motor
LGC board
Rollers