e-STUDIO556/656/756/856/557/657/757/857 © 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 126
[CC50] Horizontal registration motor abnormality
Is the horizontal registration home position sensor (PI1P) working normally?
NO Replace the sensor.
YES
Is the wiring between the finisher controller PC board and horizontal registration home
position sensor (PI1P) correct?
NO Correct the wiring.
YES
Is there any problem with the horizontal registration mechanism?
YES Fix the mechanism.
NO
Is the problem solved by replacing the horizontal registration motor (M2P)?
YES END
NO
Is the problem solved by replacing the punch driver PC board?
YES END
NO
Replace the finisher controller PC board.
To Next Page
Loading...
