8
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856/557/657/757/857
ERROR CODE AND TROUBLESHOOTING
8 - 17
CF00 Finisher related
service call
Belt escape unit home position error detection: The belt
escape unit does not leave the home position when the
Knurled belt motor has been driven for specified time.
[MJ-1029]
P. 8-130
CF10 Undefined error code processing: If the engine of the
equipment judges that a code (command) other than the
defined error codes is sent from the finisher, it regards
this as a CF10 error.
P. 8-130
CF70 New toner transport motor abnormality: The new toner
transport motor does not run normally when new toner is
supplied.
P. 8-133
CF80 Hopper motor lockup: The hopper motor does not run
normally when the power is ON or the copying is started.
P. 8-133
F070 Communication
related service call
Communication error between System-CPU and Engine-
CPU
P. 8-106
F090 Circuit related
service call
SRAM abnormality on SYS board P. 8-133
F100_0 Other service call HDD format error: Operation of HDD key data fails. P. 8-134
F100_1 HDD format error: Encryption key data of either the SYS
board or the SRAM board are damaged.
P. 8-134
F100_2 HDD format error: Encryption key data of both the SYS
board and the SRAM board are damaged.
P. 8-135
F101_0 HDD connection error (HDD connection cannot be
detected.)
P. 8-136
F101_1 Root partition mount error (HDD formatting fails.): The
HDD cannot be connected (mounted) caused by damage
to the areas in which the program is mainly stored.
P. 8-136
F101_2 Partition mount error: The HDD cannot be connected
(mounted) caused by damage to areas other than those
described in the F101_1 and F101_4 to F101_9 errors.
P. 8-136
F101_3 Partition mount error: The HDD cannot be connected
(mounted) caused by damage to areas other than those
described in the F101_1 and F101_4 to F101_9 errors.
P. 8-136
F101_4 Partition mount error: The HDD cannot be connected
(mounted) caused by damage to the “/work” partition
P. 8-137
F101_5 Partition mount error: The HDD cannot be connected
(mounted) caused by damage to the “/registration”
partition.
P. 8-138
F101_6 Partition mount error: The HDD cannot be connected
(mounted) caused by damage to the “/backup” partition.
P. 8-139
F101_7 Partition mount error: The HDD cannot be connected
(mounted) caused by damage to the “/imagedata”
partition.
P. 8-140
F101_8 Partition mount error: The HDD cannot be connected
(mounted) caused by damage to the “/storage” partition.
P. 8-141
F101_9 Partition mount error: The HDD cannot be connected
(mounted) caused by damage to the “/encryption”
partition.
P. 8-142
F102 HDD boot error: HDD does not become ready for booting. P. 8-143
F103 HDD data transfer time-out: Data reading or writing is not
executed in a specified period of time.
P. 8-143
F104 HDD data error: Abnormality is detected in the data of the
HDD.
P. 8-143
F105 Other HDD errors P. 8-143
F106_0 ADI-HDD error: Illegal disk replacement detected (ADI-
HDD Exchange to SATA-HDD).
P. 8-143
F106_1 ADI-HDD error: HDD type detection error P. 8-144
F106_2 ADI-HDD error: ADI encryption key download operation
error
P. 8-144
F106_3 ADI-HDD error: ADI authentication Admin Password
generation error
P. 8-145
F106_4 ADI-HDD error: Authentication random number
generation error
P. 8-145
Error code Classification Contents Troubleshooting
To Next Page
Loading...
