e-STUDIO556/656/756/856
53
05/08 Mode Element
Item Subitem Code
Details
RAM Contents
t mode
Processin
g
contrast
adjustmen
t
Black NW printer Toner saving ON 7332 PCL 176 0-255 M
The smaller the value, the narrower the beam width
becomes and the smaller the dots are reproduced.
t mode
Processin
g
contrast
adjustmen
t
Black NW printer Toner saving ON 7333 XPS 176 0-255 M
The smaller the value, the narrower the beam width
becomes and the smaller the dots are reproduced.
t mode
Processin
g
contrast
adjustmen
t
Black NW printer Toner saving ON 7334
printing
The smaller the value, the narrower the beam width
becomes and the smaller the dots are reproduced.
t mode
Processin
g
balance
adjustmen
t
Auto
PS/text 7360 0 Low density 128 0-255 SYS
Larger the value, the density for the target area
increases, and smaller the value, the density for the
target area decreases.
t mode
Processin
g
balance
adjustmen
t
Auto
PS/text 7360 1 Medium density 128 0-255 SYS
Larger the value, the density for the target area
increases, and smaller the value, the density for the
target area decreases.
t mode
Processin
g
balance
adjustmen
t
Auto
PS/text 7360 2 High density 128 0-255 SYS
Larger the value, the density for the target area
increases, and smaller the value, the density for the
target area decreases.
t mode
Processin
g
balance
adjustmen
t
Auto
PS/graphics 7361 0 Low density 128 0-255 SYS
Larger the value, the density for the target area
increases, and smaller the value, the density for the
target area decreases.
t mode
Processin
g
balance
adjustmen
t
Auto
PS/graphics 7361 1 Medium density 128 0-255 SYS
Larger the value, the density for the target area
increases, and smaller the value, the density for the
target area decreases.
t mode
Processin
g
balance
adjustmen
t
Auto
PS/graphics 7361 2 High density 128 0-255 SYS
Larger the value, the density for the target area
increases, and smaller the value, the density for the
target area decreases.
t mode
Processin
g
balance
adjustmen
t
Auto
PS/image 7362 0 Low density 128 0-255 SYS
Larger the value, the density for the target area
increases, and smaller the value, the density for the
target area decreases.
t mode
Processin
g
balance
adjustmen
t
Auto
PS/image 7362 1 Medium density 128 0-255 SYS
Larger the value, the density for the target area
increases, and smaller the value, the density for the
target area decreases.
To Next Page
Loading...
