Toshiba e-STUDIO657 - Page 363

e-STUDIO556/656/756/856
20
05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
08
Setting
Mode
System Network Direct SMTP 3810
Communication
setting
0 0~1 SYS
When an Internet Fax is sent, Direct SMTP
communication is set.
0: Disabled 1: Enabled
When "0: Disabled" is set, an Internet Fax is sent using
an SMTP server. When "1: Enabled" is set, direct
SMTP communication is enabled and an Internet Fax is
sent to MFPs on the intranet without using an SMTP
server. Since no SMTP server is used, the SSL
encryption and SMTPAUTH function cannot be used for
internet Fax transmission. If "1: enabled" is set in 08-
3810, set "1: Enabled" in 08-3812 as well.
1 Yes
08
Setting
Mode
System Network Direct SMTP 3811
Image encrypting at
the Direct SMTP
0 0~1 SYS
When Direct SMTP communication is performed, an
attached image is encrypted. 0: Disabled 1: Enabled
1 Yes
08
Setting
Mode
System Network Internet Fax 3812
Dummy full mode at I-
Fax transmission
0 0~1 SYS
When an Internet Fax is sent, the resolution ratio and
the paper size of an attached image are set to the full
mode.
0: Disabled 1: Enabled
If "1: Enabled" is set in 08-3810, set "1: Enabled" in 08-
3812 as well.
1 Yes
08
Setting
Mode
System Scanner 3815
XPS file thumbnail
addition
1 0~1 SYS
Thumbnail is added to the XPS file produced by the
Scan function.
0: Not added 1: Only the top page added
1
08
Setting
Mode
System Scanner 3816
XPS file paper size
setting
1 0~1 SYS
The paper size of the XPS file produced by the Scan
function is set.
0: Scanned image size 1: Standard size
1
08
Setting
Mode
System Scanner 3817
PDF file version
setting
4 0~1, 4 SYS
The version of PDF file produced by the Scan function
is set.
0: PDF V1.3 1: PDF V1.4 4: PDF V1.7
1
08
Setting
Mode
System General 3833
Home directory
function
0 0~1 SYS
Function to store a file in the user's home directory.
0: Disabled 1: Enabled
1
08
Setting
Mode
System General 3837
Display switching for
the machine
name/computer name
shown in the
notification
0 0~1 SYS
The display method of the machine name/computer
name shown in the event-related notification is
switched.
0: IP address 1: NetBIOS name/FQDN
1