e-STUDIO556/656/756/856
78
05/08 Mode Element
Item Subitem Code
Details
RAM Contents
Mode
setting for RIP
standard paper
judgment
This code is used for changing the range in which the
non-standard paper size is judged as standard paper
size. If the page size information is within standard
paper size of plus or minus the setting value, the page
size is judged as standard paper size when PS/PDF
printing. If the page size information is out of the range,
the page size is judged as non-standard paper size.
The unit of setting value is PS point. 1 PS point is
approx. 0.35 mm.
Mode
Judgment threshold
The larger the value is, area to be erased increases.
The smaller the value is, area to be erased decreases.
Mode
Judgment threshold
The larger the value is, area to be erased increases.
The smaller the value is, area to be erased decreases.
Mode
authentication
automatic login
0: OFF (A user always enters manually (current
method))
1: ON (Previous authentication information will be used)
Mode
scanned files
1: Meta Scan function ON / Normal scan function OFF
2: Meta Scan function OFF / Normal scan function ON
3: Always ON
Mode
size
0: Equivalent to scan image size
1: Fitted into any standard size
mode
conversion of
prohibited character in
filename
Sets the prohibited characters in filename to covert to
underscore.
0: \ / > < , " | ? * : ; = [ ] +
1: \ / > < " | ? * :
* 0: Existing model standard 1: Windows standard
Since setting the value to "1" allows some prohibited
characters, filename might not be processed in external
application or server.
To Next Page
Loading...
