Toshiba e-STUDIO657 - Page 422

e-STUDIO556/656/756/856
79
05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
08
Setting
mode
System General 8521
Switchover of output
format of Service
Notification
attachment
Refer to
contents
0-1 SYS
Switches the output format of date in attachment of
Service Notification.
0: YYYY.MM.DD
1: YYYY-MM-DDTHH:MM:SS
<Default value>
NAD: 1
Others: 0
1
08
Setting
Mode
System User interface Screen setting 8523
Toner near-empty
status Message
Refer to
contents
0~1 SYS
0: ON 1: OFF
<Default value>
JPC/NAD/MJD/AUD/ARD: 1
Others: 0
1 Yes
08
Setting
Mode
System General 8524
No paper Message
display
0 0~1 SYS 0: ON 1: OFF 1
08
Setting
Mode
System General 8532
Control panel
Brightness level
adjustment
4 1~7 SYS 1-7:Brightness level 1
08
Setting
Mode
System General 8537
Sorting method for
displaying private
print jobs
0 0~1 SYS
Changes the sorting order for print jobs on the private
print list. 0: Descending order 1: Ascending order
1
08
Setting
Mode
System User interface 8538
Toner near empty
notification setting
0 0-1 SYS 0: Disabled
1: Enabled
1
08
Setting
Mode
System General 8540
Date and time format
setting for Meta Scan
XML files
1 0~1 SYS
0: YYYY/MM/DDhh:mm:ss.mmm
1: YYYY-MM-DDThh:mm:ss.mmTZD
1
08
Setting
Mode
System User interface 8543
Switching to the low
power consumption
mode in the Sleep
mode
1 0~1 SYS 0: Does not enter 1: Enters under particular conditions 1 Yes
08
Setting
Mode
System User interface 8544
Tolerance for
switching to Super
Sleep mode
5 5~600 SYS
The interval between recovering from the Super Sleep
mode and making the transition to the Super Sleep
mode again. Unit: seconds.
1 Yes
08
Setting
Mode
System User interface 8546
Input setting of minus
value for image shift
when copying
0 0~1 SYS
Sets whether minus value can be input or not for image
shift when copying. If this setting is enabled, the minus
value can be input only for back side.
0: Inputting minus value is disabled.
1: Inputting minus value is enabled.
1 Yes