Toshiba e-STUDIO657 - Page 605

e-STUDIO557/657/757/857
36
05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
08
Setting
Mode
Scanner RADF 3021
Setting for switchback
operation in mixed-
size copying using
RADF
0 0~1 SYS
This setting is whether the original length is detected or
not by transporting without scanning in reverse when
A4-R/FOLIO paper or LT-R/LG paper is detected in a
mixed-size copying
0: Disabled -
AMS:
A series - Judges as A4-R without transporting in
reverse with no scanning.
LT series - Judges whether it is LT-R or LG by its
length without transporting in reverse with no
scanning.
APS:
A series - Judges whether it is A4-R or FOLIO without
transporting in reverse with no scanning.
LT series - Judges whether it is LT-R or LG without
transporting in reverse with no scanning.
1: Enable 1
AMS:
A series - Judges whether it is A4-R or FOLIO by
transporting without scanning in reverse to detect its
length.
LT series - Judges whether it is LT-R or LG by
transporting without scanning in reverse to detect its
length.
APS:
The same as that of APS in 0: Disabled .
1 Yes
08
Setting
Mode
Scanner
3025
Correction of carriage
position
2 0-2 SYS
0: No correction
1: Performs correction before scanning
2: Performs correction after scanning
1
08
Setting
Mode
Scanner RADF 3075
Allowing of trailing
edge adjustment of
scanning
0 0-1 SYS 0: Not allowed
1: Allowed
1
08
Setting
Mode
Scanner 3080
Detection method of
original size
1 1, 3 SYS
1: Two-step detection (lights twice)
3: Single-step detection (lights once)
When "3" is set, the detection accuracy of dark
originals may decrease.
1