Toshiba e-STUDIO657 - Page 608

e-STUDIO557/657/757/857
39
05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
08
Setting
Mode
System General
Real time log
notification function
3626
Department
information
transmission setting
of real time log
notification function
0 0-1 SYS
Sets whether the department information (number,
name, code) is transmitted or not in the real time log
notification function.
0: Department number, department name, department
code
1: Department number, department name
1
08
Setting
Mode
System General 3629
Enable/Disable
setting of standard
EWB function
1 0-1 SYS
0: Disabled
1: Enabled
* This code is valid for NAD, MJD and AUD only.
1
08
Setting
Mode
System Network 3631
Remote Access
(SNMP)
1 0~1 SYS 0: Disabled
1: Enabled
1
08
Setting
Mode
System General 3635 Proof print function 1 0~1 SYS 0: Invalid 1: Valid 1
08
Setting
mode
System Network InternetFax 3637
Addition of
transmission header
0 0-1 SYS 0: Disabled 1: Enabled 1
08
Setting
mode
System Network InternetFax 3638
Addition of receiving
record
0 0-1 SYS 0: Disabled 1: Enabled 1
08
Setting
mode
System Network InternetFax 3639
Adding method of
transmission header
1 1-2 SYS
1: Overwriting inside the image (5 mm from the top)
2: Adding outside the image (5 mm from the top)
1
08
Setting
mode
System Network MDS Authentication 3640
Authentication of
MDS system
0 0-1 SYS
0: Disabled (Normal mode)
1: Enabled (MDS authentication mode)
* If the EWB license has not been installed at startup,
this code becomes "0".
1
08
Setting
mode
System Network MDS Authentication 3641 Display in TopAccess 0 0-1 SYS
Sets whether the information of MDS Authentication will
be displayed or not in TopAccess and control panel.
0: Non display
1: Display
* When "1" is set in 3640, the setting value of this code
becomes "1" accordingly. The setting value cannot be
changed to "0".
* If the EWB license has not been installed at startup,
this code becomes "0".
1