Toshiba E-STUDIO850 - Page 195

March 2005 © TOSHIBA TEC e-STUDIO520/600/720/850 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 171
2
Image [Binarization] 700, 701, 702
[Image density] 501, 503, 504, 505, 506, 507,
508, 509, 510, 512, 514, 515, 710, 714, 715,
719, 720, 724, 725, 729, 845, 846, 847, 848,
850, 851, 852, 853, 855, 856, 857, 858, 860,
861, 862, 863, 931, 932, 933, 934, 935, 936,
937, 938, 939, 940, 941, 942
[Pixel size] 663
[Gamma balance] 596-0 to 2, 597-0 to 2,
598-0 to 2, 599-0 to 2
[Gamma adjustment] 593, 594, 595, 943, 944,
945
[Background processing] 600, 601, 602, 869,
870, 871, 872, 946, 947, 948
[Sharpness] 620, 621-0 to 1, 622, 865-0 to 2,
866-0 to 2, 867-0 to 2, 868-0 to 1, 922, 923,
924-0 to 1
[Smudged/Faint text] 653, 654, 655, 928
[Toner saving] 664, 665
[Margin] 430, 431, 432, 433, 434-0 to 1, 435,
436, 437, 438
[Range correction] 532, 533, 534, 570, 571,
572, 693, 694, 695, 825, 826, 827, 828, 830,
831, 832, 833, 835, 836, 837, 838, 913, 914,
915, 916, 917, 918, 919, 920, 921
[Custom Mode] 508, 509
[Error diffusion / Dither] 502
[Default setting] 550
Image control [Image quality control] 241, 242, 244, 247,
248, 249, 260, 261, 262, 263-0 to 1,
264-0 to 1, 265-0 to 1, 268, 269, 270, 290,
291, 292, 293, 294, 295, 296, 299
[Image quality control autostart] 1826, 1827,
1828, 1829, 1830, 1831
[Image quality open-loop control] 1811
[Image quality closed-loop control] 1809,
1810, 1814, 1815
[Contrast voltage] 1820, 1821, 1833
[Developer unit prerunning period] 1808
[Condition setting] 804
[Counter for accumulated number] 1371
[0 clearing] 800
[Transfer output correction] 1837
[Toner control] 1910
[Drum surface potential sensor] 1812, 1813,
1345
[Background potential offset correction] 1834
[Auto-start print volume setting] 803, 810
[Laser power offset correction] 1835
[Exposure amount (laser power)] 1824, 1825
Drive system [Motor speed] 409, 412, 421, 422, 424, 425,
426, 427, 439, 446-0 to 1, 447-0 to 1,
451-0 to 1, 453-0 to 1, 454-0 to 1, 456-0 to 1,
464-0 to 3, 475-0 to 3, 478-0 to 3, 481, 482,
483, 484, 485, 486, 487, 488, 489, 490, 493
Classification Adjustment Mode (05) Setting Mode (08)