Toshiba E-STUDIO850 - Page 554

e-STUDIO520/523/600/603/720/723/850/853 © 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved
FIRMWARE UPDATING
6 - 30
<Updating Scanner ROM>
(1) Install the ROM to the download jig.
Make sure the direction is correct ( P.6-4 "Fig. 6-2 Jig board: K-PWA-DLM-320").
(2) Shut down the equipment.
(3) Take off the top right cover.
Fig. 6-27
(4) Take off the right upper cover.
Fig. 6-28
Top right cover
Right upper cover