Toshiba e-studio905 - Using Smartdevicemonitor for Admin

Using SmartDeviceMonitor for Admin
Using SmartDeviceMonitor for Admin, you can monitor the network printers. Also, you can change the
configuration of the network interface board using TCP/IP or IPX/SPX.
• IPv6 cannot be used on this function.
Protocol stack provided with Operating System
• Windows 2000
TCP/IP
IPX/SPX
NetWare
Client for Windows XP/2000, Novell
• Windows Server 2003/2003 R2
TCP/IP
IPX/SPX
NetWare
Novell Client for Windows XP/2003
• Windows Server 2008
TCP/IP
• Windows XP
TCP/IP
IPX/SPX
NetWare
Novell Client for Windows XP/2003
• Windows Vista
TCP/IP
Available operations
The following functions are available:
• Limits settings done from the control panel, and disables changes made to certain items.
• Enables selection of paper type loaded in the machine.
• Switches to, and comes out of Energy Saver mode.
• Checks information about printing, paper quantity, etc.
• Simultaneously monitors multiple printers. When there are many printers, you can create groups
and classify printers to facilitate management.
Using SmartDeviceMonitor for Admin
151
5