Toshiba e-studio905 - Registering Names to a Group

11. Press [Exit].
12. Press [OK].
13. Press [Exit].
14. Press the [User Tools] key.
• To change the name, key display and title, see "Registering Names".
• p.254 "Registering Names"
Changing the protocol
This section describes how to change the protocol.
1. Press [SMB] or [FTP].
2. A confirmation message appears. Press [Yes].
Changing the protocol will clear all settings made under the previous protocol.
3. Enter each item again.
Deleting a NCP Folder
This section describes how to delete the registered NCP folder.
1. Press the [User Tools] key.
6. Registering Addresses and Users for Scanner Functions
286
6