Toshiba e-studio905 - Setting Values

Setting Values
0101: Adjust Image Position Across Feed Direction
Adjust the vertical position of the print image. Press [+] or [-] to move the image backward or forward.
One-sided printing (Straight feeding)
BRU023D
Same when feeding in reverse direction.
Duplex printing (Straight feeding)
BRU025D
Same when feeding in reverse direction.
• Tray 1
• Max.: 2.0 mm
• Min.: -2.0 mm
• Step: 0.1 mm
The default setting is "0" mm.
• Tray 2
• Max.: 2.0 mm
• Min.: -2.0 mm
• Step: 0.1 mm
The default setting is "0" mm.
• Tray 3
8. Appendix
310
8