Toshiba e-studio905 - Page 351

• 8
1
/
2
11
• Max.: 4.0 mm
• Min.: -4.0 mm
• Step: 0.2 mm
The default setting is "0" mm.
• 8K
• Max.: 4.0 mm
• Min.: -4.0 mm
• Step: 0.2 mm
The default setting is "0" mm.
• B5 JIS
• Max.: 4.0 mm
• Min.: -4.0 mm
• Step: 0.2 mm
The default setting is "0" mm.
• Other Paper Sizes
• Max.: 4.0 mm
• Min.: -4.0 mm
• Step: 0.2 mm
The default setting is "0" mm.
0511: Adjust Gate Fold Position 2
Adjust the fold position (S2) of segment 2 of gate fold sheets when using the optional Multi-Folding
Unit.
The upper right illustration shows a partly opened, double parallel-folded sheet (folded in half), and
the lower right illustration shows a fully folded sheet. The mark indicates the leading edge (relative
to the paper feed direction), and the mark indicates the trailing edge.
BRU048D
Adjustment Settings for Operators
349
8