7. Select the LDAP server you want to change.
8. Change the settings as necessary.
9. Press [OK] after changing each item.
10. Press [Exit].
11. Press the [User Tools] key.
Deleting the LDAP server
This section describes how to delete the programmed LDAP server.
1. Press the [User Tools] key.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ Next].
5. Press [Program / Change / Delete LDAP Server].
6. Press [Delete].
7. Select the LDAP server you want to delete.
8. Press [Yes].
9. Press [Exit].
10. Press the [User Tools] key.
Programming the LDAP server
57
To Next Page
Loading...
