OPERATION
At most 2 stages can be set for cooking. If one stage is Defrost, it will automatically
set to be the first stage.
16.Muti-Stage Cooking
EXAMPLE: 80% Power Level for 5 minutes followed by 60% Power Level for 10
minutes; saved as memory 3.
NOTE: Auto Menu cannot be set in Multi-stage Cooking.
Press Memory 3 times; screen displays 3.
Press Time Cook, then press "5" , "0" and "0" to set first stage cook time.
Press Power Level once, then press "8" to choose 80% first stage cooking
power.
Press Time Cook again, then press "1", "0", "0" and "0" to set second stage
Press Power Level again, then press "6" to choose 60% second stage cooking
power.
Press to immediately start multi-stage cooking.
To choose the procedure from the memory list, press Memory three times.
Screen will display "3"; press to run procedure.
a.
b.
c.
d.
e.
f .
g.
NOTE:
If you do not want to save a particular multi-stage program as a procedure, do not
press Memory as the first step. Press after programming both stages.
cook time.
In standby mode, press the " " once (less than 3 seconds to avoid
starti ng the child lock
functi on to enter the Energy Saver mode.
)
In child-locked mode, press t he "
" once (less than 3 seconds)
and release t o enter the
Energy Saver Mode .
Above operation is the only way to start the Energy Saver mode.
The Energy Saver mode works only if the door is closed.
(1)
(2)
(3)
(4)
17.ENERGY SAVER MODE
To Next Page
Loading...
