Toshiba EM925A5A-SS - Page 32

EN-29
NOTE
• Auto Menu cannot be set in Multi-stage Cooking.
Example: 80% Power Level for 5 minutes followed by 60% Power Level for 10 minutes;
saved as memory 3.
• Press "Memory" 3 times; screen displays 3.
• Press "Time Cook", then press "5", "0" and
"0" to set rst stage cook time.
• Press "Power Level" once, then press "8" to
choose 80% rst stage cooking power.
• Press "Time Cook" again, then press "1", "0",
"0" and "0" to set second stage cook time.
• Press "Power Level" again, then press "6" to
choose 60% second stage cooking power.
• Press " START/+30Sec. " twice to immediately start multi-stage
• To choose the procedure from the memory
list, press "Memory" three times. Screen
will display "3"; press " START/+30Sec. " to
run procedure.
• If you do not want to save a particular multi-stage program as a procedure, do
not press "Memory" as the rst step.
• Press " START/+30Sec. " after programming both stages.
NOTE
cooking.