Toshiba ESTIA HWS-455XWHM3-E - Page 46

–45–
Hydro Unit
Installation Manual
Outdoor (Hydro) model name
Outdoor (Hydro) unit serial No.
(1) Press the [ ] / [ ] button to select
“Outdoor model name (Hydro model name, Outdoor
unit serial No., Hydro unit serial No.)” on the
Information input screen, then press the [
]
button.
(2) Press the [
] / [ ] button or [ ] / [ ]
to select the character (the selected character is
highlighted), then press the [
] button. The
character is displayed on the upper part of the
screen from left-hand side.
If the [
] button is pressed in the state where
“Del” is selected, contents currently displayed is
deleted from right-hand side.
Press the [
] button in the state where “Fix” is
selected to register contents currently displayed on
the upper part of the screen.
• After Information input has been finished,
confirm the item “Information” on the MENU
screen to check the information is registered
correctly.
 Alarm history
• List of latest 10 alarm data: error information of error
code, date and time is displayed.
(1) Press the [
] / [ ] button to select “Alarm
history” on the FIELD SETTING MENU screen,
then press the [
] button.
To reset the alarm history
(1) Press the [ ] button to reset the alarm history.
(2) Press the [
] button, then all alarm data is
cleared.
Service contact tel No.
Information input
Outdoor model name
Outdoor unit serial No.
Hydro model name
Hydro unit serial No.
SET
HWS-P1105HR-E
SET
Del
Fix
Test mode
FIELD SETTING MENU(1/2)
Floor drying
Forced defrosting
Information input
Alarm history
SET
Alarm history(1/3)
RESET
Code Date Time
Alarm history
NOYES
Reset all alarm data?
45-EN