Toshiba FC-22 - Automatic Adjustment Error of bin Inside Paper Sensor

January 2000 © TOSHIBA TEC 4 - 43 FC-22 TROUBLESHOOTING
CCA Automatic adjustment error of bin inside paper sensor
After having retried automatic adjustment of the bin inside paper sensor, is there any abnormal-
ity found?
Complete.
Is the connector J12 on the sorter controller board connected normally?
Insert the connector J12 properly.
After having tried automatic adjustment of the bin inside paper
sensor, is there any abnormality found?
Complete.
Replace the sorter controler board.
After having tried automatic adjustment of the bin inside paper sensor, is there
any abnormality found?
Complete.
Check if the bin inside paper sensor is installed securely.
After having tried automatic adjustment of the bin inside paper sensor, is there
any abnormality found?
Complete.
Replace the bin inside paper sensor.
After having tried automatic adjustment of the bin inside paper sensor, is there
any abnormality found?
Complete.
YES
▼
NO
▼
YES
▼
NO
▼
YES
▼
NO
▼
YES
▼
NO
▼
YES
▼
NO
▼
YES NO
▼
▼ ▼ ▼
▼
▼