Toshiba FC-22 - Blotched Image

FC-22 TROUBLESHOOTING 4 - 80 January 2000 © TOSHIBA TEC
Cause/Defect area Step Check items Measures
Paper
Transfer belt
High-voltage transformer
(transfer roller)
1 Too thin paper used?
2 Paper too dry?
3 Transfer belt in proper contact with drum?
4 Any abnormalities on belt?
5 High-voltage transformer output abnormal?
Change paper.
Change paper.
Correct/adjust belt.
Clean or replace belt.
Adjust output. Replace transformer, if necessary.
(24) Blotched image
Feeding direction