Toshiba G9000 SERIES - Table 1.2 Rating of Bypass Input Circuit Breaker

G9000 Installation and Operation Manual 5
This UPS does not include a Bypass input circuit breaker (MCCB) to protect
the bypass circuit. The Bypass input circuit breaker (MCCB) is to be field
supplied and installed. Recommended Breaker (MCCB)'s Specifications are
as follows:
TABLE 1.2 Rating of Bypass Input Circuit Breaker
Capacity (kVA) Bypass Voltage (Vac)
Bypass Rating (Aac)
Breaker (A)
80
480
96
125
100
480
120
150
160
480
192
250
225
480
271
350
300
480
361
500
500
480
601
800
750
480
902
1200
AC input and AC output overcurrent protection and disconnect devices shall be field
supplied and installed. The DC circuit breaker (MCCB) shall be field supplied and installed.
The overcurrent protection device should be installed in the Battery cabinet and rated as
indicated in TABLE 1.6.
Note: The DC input overcurrent protection (Battery disconnect breaker) hereinafter will be
referred as “CB2”.
WARNING 4
!
NOTE