Toshiba GR200 Series - Page 1075

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1052 -
8001001111
1
BI1
[INVERSE-SW]
1
&
[BI1-CPL]
Off
On
&
BI2
BI3
BIn
Filter
t
0
0.000-300.000s
On Delay Timer
0
t
0.000-300.000s
Off Delay Timer
Normal
Inverse
&
&
1
[INVERSE-SW]
1
&
[BI2-CPL]
Off
On
&
t
0
0.000-300.000s
On Delay Timer
0
t
0.000-300.000s
Off Delay Timer
Normal
Inverse
&
1
[INVERSE-SW]
1
&
[BI3-CPL]
Off
On
&
t
0
0.000-300.000s
On Delay Timer
0
t
0.000-300.000s
Off Delay Timer
Normal
Inverse
&
1
[INVERSE-SW]
1
8**********
&
[BIn-CPL]
Off
On
&
t
0
0.000-300.000s
On Delay Timer
0
t
0.000-300.000s
Off Delay Timer
Normal
Inverse
&
1
BIn
8101011111
8201021110
8001001110
8101011110
8201021110
8001001172
8101011172
8201021172
BI1-NC
BI2-NC
BI3-NC
BIn-NC
BI1
BI2
BIn
BI3
BI1-CPL
BI2-CPL
BI3-CPL
BIn-CPL
8**********
For Relay & and
control functions
From
External devices
1
&
1
&
1
&
Figure 5.4-1 Common programmable logic for the BI1A module
Respective element IDs (i.e., 8001001172 and others) designate respective signal
monitoring points of the binary input circuits (i.e., BI1-CPL and others). Thus, the user can
handle the signals on the binary input circuit using element ID together with function ID.
When we assume that the BI1A module is at IO#1 slot in the IED case, and if the user wishes
to see the first circuit signal of this BI1A module, the user can identify its signal† using the
element ID (8001001172) and the function ID of IO#1 slot‡.
R1
Low
High
[THRES_Lvl]
R1