Toshiba GR200 Series - (i)-3 Connection points for the PLC; (ii) Tables (IO_SLOT2 to SLOTn) at IO#2 to IO#n (Function ID: 200 B02 to 200 B0 n); (ii)-1 Before the contact-driver; (ii)-2 After the contact-driver

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1082 -
Connection points for the PLC
◆ Connection point in PLC logic
Element ID
Name
Description
310200E11D
BO1-SOURCE
BO1 output command by PLC-logic
310201E11D
BO2-SOURCE
BO2 output command by PLC-logic
310202E11D
BO3-SOURCE
BO3 output command by PLC-logic
310203E11D
BO4-SOURCE
BO4 output command by PLC-logic
310204E11D
BO5-SOURCE
BO5 output command by PLC-logic
310205E11D
BO6-SOURCE
BO6 output command by PLC-logic
310206E11D
BO7-SOURCE
BO7 output command by PLC-logic
310207E11D
BO8-SOURCE
BO8 output command by PLC-logic
310208E11D
BO9-SOURCE
BO9 output command by PLC-logic
310209E11D
BO10-SOURCE
BO10 output command by PLC-logic
31020AE11D
BO11-SOURCE
BO11 output command by PLC-logic
31020BE11D
BO12-SOURCE
BO12 output command by PLC-logic
31020CE11D
BO13-SOURCE
BO13 output command by PLC-logic
31020DE11D
BO14-SOURCE
BO14 output command by PLC-logic
31020EE11D
BO15-SOURCE
BO15 output command by PLC-logic
31020FE11D
BO16-SOURCE
BO16 output command by PLC-logic
310210E11D
BO17-SOURCE
BO17 output command by PLC-logic
310211E11D
BO18-SOURCE
BO18 output command by PLC-logic
(ii) Tables (IO_SLOT2 to SLOTn) at IO#2 to IO#n (Function ID: 200B02 to
200B0n)
Before the contact-driver
Table is the same as the table in previous section (i)-1.
After the contact-driver
Table is the same as the table in previous section (i)-2.
Connection points for the PLC
Table is the same as the table in previous section (i)-3.