Toshiba GR200 Series - 5.6 Human Machine Interface (HMI); 5.6.1 Outlook

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1088 -
Human Machine Interface (HMI)
5.6.1 Outlook
Figure 5.6-1 shows the outlook of human machine interface module (HMI) on the front panel.
The HMI has a screen (standard LCD or large LCD ‘MIMIC’), LED indicators (#1– #26),
operation keys, function keys (F1–F7), monitoring jacks (Term A/B/C) and a USB receptacle.
The LCD can display information; e.g. IED operation menu, status, setting data, monitoring,
fault records and others. We shall see the menus on the display in Chapter User interface later.
A USB receptacle in B-type is provided for the connection to the PC. Thus, the user can connect
the engineering tools (GR-TIEMS®) or the PLC editor (MULTIPLOG®) with the IED using the
USB receptacle.
LED indicators
(#1–#26)
Indicator label
Screen
Monitoring jacks
(Term A/B/C)
USB port
Function keys
(F1–F7)
Operation keys
Figure 5.6-1 HMI on front panel