Toshiba GR200 Series - 9.8 Statistics data (Total time group); 9.8.1 Time information on the screen; 9.8.2 Report setting for TOTALTIM (Dead band feature)

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1202 -
Statistics data (Total time group)
Total times are provided by the total time measurement function†, as shown in Table 9.6-1.
Table 9.8-1 Total time data
Group
Displayed quantities
Origin of time data
Correspondences
to TOTALTIM†
Total time
TOTAL TIME 1
TOTALTIM01 function
TT1
TOTAL TIME 2
TOTALTIM02 function
TT2
TOTAL TIME 3
TOTALTIM03 function
TT3
….
….
….
TOTAL TIME 12
TOTALTIM03 function
TT12
†Note: See Chapter Control and monitoring application: Total time measurement
function
9.8.1 Time information on the screen
The user can see the total times on the IED screen.
Figure 9.8-1 Example of Total Time screen
Note: See Chapter User interface: Monitoring sub-menu: Statistics sub-menu .
9.8.2 Report setting for TOTALTIM (Dead band feature)
The data collected with the TOTALTIM function will be sent to the network; thus, the user
should set a regulation value using the SD feature in the TOTALTIME function. See section
Setting for the report (Dead band) in the TOTALTIME function.
Total Time
10:48 1/12
TOTAL TIME 1 +
****d **h **m
TOTAL TIME 2 +
****d **h **m
TOTAL TIME 3 +
****d **h **m