- 1238 -
10.2.3 Supervision of RAM (RAM error)
The read-write operation on RAM circuit of the CPU module is verified at any time; when the
error is found an error message is displayed by the supervision function.
(i) Error level
The error level has been set at level 1 (Serious error
1
) for the supervision; checking errors on
the RAM is carried out at any time. If the error is detected, the IED restarts its operation
automatically. The supervision function runs on the CPU module
1
. Clearing the error message
is made promptly when the error is cleared.
1
Note: The CPU module is discussed in Chapter
Technical description: Signal processing
and communication module: Processing module.
(ii) Error message
When detecting an error, an error message can be shown on the LCD screen and an LED is lit.
Table 10.2-7 Error messages provided by the supervisor in CHK_RAM
Meaning of the information
Error detection in the RAM located on the following module
instructed with “CP*_” as follows:
CP1M: CPU module
Table 10.2-8 Detailed information in Hexadecimal in CHK_RAM
Meaning of the detailed information
(No information displayed)
(No information displayed)
(No information displayed)