Toshiba GR200 Series - (iv)-5 Edit Report Control Block (RCB)

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1362 -
Edit Report Control Block (RCB)
Report Control Block (RCB) is used to send report from IEDs to client. If the user
wishes to assign the DataSet to Report Control Block, follow the steps below:
1. Under the LN tree structure, select Prot, Right click LLN0 and select Edit
Report Control. Report Control List screen appears as shown in Figure 11.3-18.
2. Click Add or Edit to add a new dataset or to edit the existing dataset in the
Report Control List window as shown in Figure 11.3-18.
Figure 11.3-18 Edit Report Control screen