Toshiba GR200 Series - Page 1443

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1420 -
from the command receiving.
For example, when the DCO=On command is received under “Inverse” checked,
Command ACK responds in case of “ACK Sig = NACK Sig = 1” after the timeout setting
time.
Table 11.4-16 Judgment Scheme of Command Response (ACK Sig = NACK Sig)
“Inverse” checked
Command response signal
Receiving
command DCO
No-checked
Checked
(1)NACK Sig=
ACK Sig = 0
(2)NACK Sig =
ACK Sig = 1
(3) NACK Sig =
ACK Sig = 0
(4) NACK Sig =
ACK Sig = 1
Off
Command ACK
responds.
Command NACK
responds.
Command NACK
responds.
Command ACK
responds.
On
Command NACK
responds.
Command ACK
responds.
Command ACK
responds.
Command NACK
responds.