Toshiba GR200 Series - Page 1459

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1436 -
Table 12.2-1 Outline of Main-menu and their purposes
Sub-menu
Purpose and functions
Record
The "Record" sub-menu provides fault record, event record and disturbance
record. The user can erase each record individually or can clear all records at
the same time. The user can assign event records to three distributed “Event
Record” sub-menus as required.
Monitoring
The "Monitoring" sub-menu displays all of the status values for the IED, such
as Metering, Binary I/O, Communication, Relay Element, Statistics,
Interlock, GOOSE Monitoring, and Diagnostics.
Setting
The "Setting" sub-menu is used to view or change the settings: Record,
Metering, Communication and Protection.
I/O Setting
The "I/O Setting" sub-menu is used to view or change the settings for inputs,
configurable binary inputs, configurable binary outputs, and configurable
LEDs.
Control
The “Control” sub-menu is used to manipulate an external gear such as circuit
breaker (CB), isolator, etc.
Time
The "Time" sub-menu provides settings for calendar clock, time zone, the
source of time synchronization and the display format of the calendar clock.
Test
The "Test" sub-menu is used to set and to test the following: a trip circuit,
forcible operation of binary outputs from the IED, time measurement of
variable timers, and observation of the binary signals in logic circuits.
Information
The "Information" sub-menu displays information about the IED such as
hardware, software, communication, etc.
Security
Setting
The "Security Setting" sub-menu is used to change the password and access
level, providing high levels of security by assigning users different levels of
access.
Login/Logout
When the "Security Setting” sub-menu is ON, the “Login/Logout” sub-menu
is displayed.