- 1437 -
Record sub-menu
The Record sub-menu is composed of several sub-menus: fault record, event record,
disturbance record, and clearance of all records. In each sub-menu, the user can clear records
separately.
Figure 12.3-1 Display of Record
Table 12.3-1 Operation and display in Record sub-menu
Press the key ► to go to the sub-menu
Press the key ENTER for executing “Clear all records”.
Confirmation dialog screen will be displayed.
(i) Fault Record
The “Fault Record” sub-menu displays the date and time of fault occurrence, fault phase,
tripping mode, and the power system quantities, as shown in Figure 12.3-2.
Figure 12.3-2 Display of Fault Record
Record
10:48 1/6
_Fault Record >
Event Record1 >
Event Record2 >
Event Record3 >
Disturbance Record >
Clear All Records +
Fault Record
10:48 1/6
#1 2012-07-25 >
10:48:21.223
#2 2012-07-21 >
01:15:55.018
#3 2012/07/21 >
13:11:29.621
Fault Record#1
10:48 1/222
2
012-07-25
10:48:21.223
Phase AB
Trip 1,2,3,4,5,6
OC1
2012-07-25
To Next Page
Loading...
