- 1441 -
Clear of Event Records
Figure 12.3-8 shows the steps to display and erase event records. To clear all records, refer to
section (i)-3.
Figure 12.3-8 Clear Event
1). Move cursor to Event Record 1, 2, or 3 sub menu and press ►.
2). Event Record screen is displayed. Press ENTER at the Clear
Records sub menu.
3). Clear all Event records if ENTER is pressed. Back to display of
Event Record directly if CANCEL is pressed.
Record
10:48 2/6
Fault Record >
_Event Record 1 >
Event Record 2 >
Event Record 3 >
Disturbance Record >
Clear all Records +
Event Record1
10:48 1/2
Record List >
_Clear Records +
Event Record1
Clear records?
ENTER=Yes CANCEL=No
To Next Page
Loading...
