Toshiba GR200 Series - Page 1481

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1458 -
Figure 12.5-9 Setting example in case #2
†Note: This example illustrates how to set a communication protocol, so that we discuss
neither the inclusion of IEC61850, IEC103, DNP3.0, and Modbus nor the selection
of those protocols. See Figure 11.1-1 for the general about the protocol selections.
Main Menu
10:48 3/9
Record >
Monitoring >
_Setting >
IO Setting >
Time >
Test >
IEC61850
10:48 1/6
_850BLK +
Normal
GSECHK +
ON
SI1-1 +
254
IEC61850
10:48 1/6
850BLK +
Normal
GSECHK +
ON
SI1-1 +
254
Communication
10:48 2/5
LAN >
*
IEC61850†
>
IEC103†
>
Modbus†
>
DNP†
>
IEC61850
10:48 1/6
*850BLK +
Block
GSECHK +
ON
SI1-1 +
254
Setting
Change setting?
ENTER=Yes CANCEL=No
Setting
10:48 3/7
Record >
Metering
>
_Communication >
Protection >
Counter >
Function key >
Communication
10:48 2/5
LAN >
_IEC61850
†
>
IEC103†
>
Modbus†
>
DNP†
>
[►]
[◄]
[►]
[◄]
[►]
[◄]
[ENTER]
[CANCEL]
[CANCEL]
[ENTER]
The changed setting is
confirmed.
IEC61850
10:48 1/6
*850BLK +
Block
GSECHK +
ON
SI1-1 +
254
[►] / [▼] /
[▲] / [◄]
[CANCEL]
[ENTER]
[◄]
[►]
[◄]
The changed setting is
canceled.
Setting
10:48 3/7
Record >
Metering
>
_Communication >
Protection >
Counter >
Function key >
[CANCEL]