Toshiba GR200 Series - (iv)-3 Change group settings: Upon shipment from the factory, the default settings are set. Therefore, in each group, the user can change the settings of the protection functions and other features. To change the settings in each group, refer to the s...; (v) Configuration of Function keys

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1461 -
Figure 12.5-12 Copy group setting
Change group settings: Upon shipment from the factory, the default settings
are set. Therefore, in each group, the user can change the settings of the
protection functions and other features. To change the settings in each group,
refer to the setting method discussed in section 12.5(i).
(v) Configuration of Function keys
Function keys (F1 to F7) on the IED front panel provide a feature to navigate to a specific
screen, which is configurable by the user. These keys have their own LED, which can be
Copy Group (A->B)
10:48 1/2
A (1 – 8): +
3
_B (1 - 8): +
1
Protection
Copy Group?
ENTER=Yes CANCEL=No
[►]
[ENTER]
Copy Group(A->B)
10:48 1/2
A (1 – 8): +
3
*
B (1 - 8): +
2
Protection
10:48 1/11
Common
Active Group +
1
*Copy Group(A->B) >
Group 1 >
Group 2 >
[ENTER]
[►
]
[▲]
Copy Group(A->B)
10:48 1/2
_A (1 – 8): +
3
B (1 - 8): +
1
Copy Group(A->B)
10:48 1/2
A (1 – 8): +
3
B (1 - 8): +
1
[◄]
[◄]
Copy Group(A->B)
10:48 1/2
A (1 – 8): +
3
*B (1 - 8): +
2
[▼]
[▲]
[ENTER]
The changed
setting is confirmed.
Protection
10:48 1/11
Common
Active Group >
1
Copy Group(A->B) >
Group 1 >
Group 2 >