Change place and contents
Added the implementation rules for communication
modules
Revised the contents for installation
Revised all contents in Chapter Installation and
replacement
Added the tips for setting trip mode [DIFL-TMPD] with
Fig. 2.2-4
Added DIFLFS-EN switch in Fig. 2.2-4; Added missing
[DIFLS-EN] switch in Fig. 2.2-5.
Added the tips for setting trip mode [Z*G-TMPD] with
Fig. 2.10-51
Corrected incorrect setting name “Type” to “Timer” in
OC
Corrected incorrect setting name “Type” to “Timer” in
EF
Corrected incorrect setting name “Type” to “Timer” in
OCN
Corrected the signal destinations for TRC in Fig. 2.18-
2 in THM
Corrected the function block ID number in OV
Corrected the function block ID number in OVS
Added missing contents of OVG function newly
Corrected the function block ID number in UV
Corrected the UVS signal destinations for TRC in Fig.
2.25-4; Corrected the function block ID number
Corrected the tables for trip signals coming from
respective relays (Table 2.33-2 and -6)
Added sample programing for DTT and RDIF functions
Added the notice about displaying the event
information on GR-TIEMS
Added time information (i.e., current time) in the error
screen in Fig. 10.1-1
Added new pillars and beams for minor changed IED
cases
Added the tips for setting [ZS-Test.CTRL]
Added calculation examples to get measurement
coefficients in IEC103 communication
Revised the notice how to recognize the software codes
on the nameplate
Revised the contents for setting trip mode [DIFL-
TMPD]
Revised the contents for setting trip mode [Z*G-TMPD]
Revised the check method about the software code
using ordering codes
To Next Page
Loading...
