- 23 -
2 Relay application
Earth fault protection (EF)
-Blocking reclose in ZS, ZG
---with Overcurrent element
-Blocking reclose in DIFL
---with Phase current change detector
-Blocking reclose in DIFGL
---with Earth fault current element
---with Multi-level OC elements
---with UV element in single phase
---with UV element in phases
Broken conductor protection (BCD)
---with UV change element
Breaker failure protection (CBF)
-in Distance relay (ZS/ZG)
Cold load protection (CLP)
Fault locator (FL-A and FL-Z)
Frequency protection (FRQ/DFRQ)
-Common control (COMM_APPL)
Inrush current detection(ICD)
Overcurrent protection (OC)
CT failure detection scheme (CTF)
Overcurrent protection in negative (OCN)
Overvoltage protection (OV)
-CT circuit-failure detection in DIFL
Overvoltage protection in phases (OVS)
-CT circuit-failure detection in DIFGL
Overvoltage protection in ground (OVG)
Current diffential protection
Out of step with voltage (OSTV)
-Outline for segregated-phase (DIFL)
-Outline for earth fault (DIFGL)
-POP with directional earth (DEFCAR)
-Check relays characteristics in DIFL
-POP with distance relay (DISCAR)
-Check relay characteristic in DIFGL
-UOP with directional earth (DEFCAR)
-Charge-current compensation in DIFL
-UOP with distance relay (DISCAR)
-Charge-current compensation in DIFGL
-BOP with directional earth (DEFCAR)
-CT saturation countermeasure in DIFL
-BOP with distance relay (DISCAR)
-Differential current monitor in DIFL
-PUP with distance relay (DISCAR)
-Through-fault-current in DIFL
-Direct transfer trip (DTT)
-Fault on double circuit-lines in DIFL
-DISCAR relay characteristics
-Fault on Three-terminals line in DIFL
-Common relays (PROT_COMMON)
-Stub protection with OC (STUB-OC)
-Detection of current change
Distance protection (ZS/ZG)
Switch on to fault scheme
-SOTF with Distance relay
-Z1,Z1X,Z2 to Z5 element characteristics.
Thermal overload function (THM)
-Load enchroachment block relay (LEB)
-Power swing block relay (PSB)
Under-voltage function (UV)
-Blocking phase-ground elements
Under-voltage function for phases(UVS)
-Enhancing faulted phases detection
Voltage check for ARC(VCHK)
VT failure detection (VTF)