Toshiba GR200 Series - (i)-1 Defining SBO mode; (i)-2 Defining DIR mode

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 603 -
Defining SBO mode
Figure 3.7-16 exemplifies the GCNT01 logic node saved as “GIGO3302”; in the SBO mode, the
user should select the following items for the “GIGO3302$ISCSO” using GR-TIEMS:
✓ SBOw
✓ Oper
✓ Cancel
✓ Origin
✓ stSeld
✓ sboClass† (choice ”operate-once”)
✓ ctlmodel (choice ”SBOes or SBOns”)
†”sboClass” can be found by scrolling down.
Figure 3.7-16 LN editing screen for SBO mode (for example)
Defining DIR mode
Figure 3.7-17 exemplifies the GCNT01 logic node saved as save as “GIGO3302”; in the DIR
mode, the following three items should be selected using GR-TIEMS.
✓ Oper
✓ Origin
✓ ctlmodel (choice ”SBOes or SBOns” )
Figure 3.7-17 LN editing screen for DIR mode (for example)