- 616 -
3.8.4 Signal
◆ Signal monitoring point
MDCTRL(Function ID: 550001)
MDCTRL01 execute command by OWS(HMI)
MDCTRL01 execute command by RCC
MDCTRL01 execute command by Remote
MDCTRL01 select command by OWS(HMI)
MDCTRL01 select command by RCC
MDCTRL01 select command by Remote
MDCTRL01 select or execute command received
MDCTRL01 selected signal(stSeld) for SAS
MDCTRL01 control event data (selected)
MDCTRL01 control event data (select fail)
MDCTRL01 control event data (select release)
MDCTRL01 control event data (execute output on)
MDCTRL01 control event data (execute command ng)
MDCTRL01 control event data (execute fail)
MDCTRL01 travelling info for control
MDCTRL01 cancel command fail signal
MDCTRL01 cancel command success signal
MDCTRL01 cancel command mode err
MDCTRL01 cancel command fail factor condition signal
MDCTRL01 control logic stage(unselected)
MDCTRL01 control logic stage(under selection)
MDCTRL01 execute command fail factor signalcheck
MDCTRL01 execute complete signal
MDCTRL01 timeout after execute completion
MDCTRL01 execute condition signal 01
MDCTRL01 execute condition signal 02
MDCTRL01 execute condition signal 03
MDCTRL01 execute fail signal
MDCTRL01 execute output signal
MDCTRL01 execute success signal
MDCTRL01 On direction execute command fail condition signal
MDCTRL01 On direction execute command OK condition signal
MDCTRL01 On direction selected condition signal
MDCTRL01 On direction select condition signal 19
MDCTRL01 On direction select condition signal 20
MDCTRL01 On direction select condition signal 21
MDCTRL01 no direction selected condition signal
MDCTRL01 no direction select condition signal 06
MDCTRL01 no direction select condition signal 07
MDCTRL01 no direction select condition signal 10
MDCTRL01 Test direction execute command fail condition signal
To Next Page
Loading...
